Select call tone 4 for. VibraCall® (CLS only). 3. Press and hold Push to Talk to exit, or press S to continue programming. To transmit your call tone. progress, the PTT button allows the radio to transmit to other radios in the call. Press and hold down PTT button to talk. Release the PTT button to listen. position of the squelch control knob. 1 PTT (Press to Talk). For transmission, press this switch and speak into the microphone. Press and hold the microphone PTT (push to talk) switch. The Transmit LED will glow RED or the LCD indicator will show TX when the transmitter is on. transmitting when the "TX indicator" lights red. You can cause the radio to transmit by pressing the "PTT"switch. ALWAYS keep the antenna at least 60cm. To transmit (talk), push the Push-To-Talk (PTT) button; to receive, release the PTT button. Hand-held radio operation. Hold the radio in a vertical position. To transmit, press the PTT Transmit Button on the side of the. CB. Release the button to receive the reply. KEYPAD LOCK. To transmit, press and hold the PTT (Push-To-Talk) switch. The other radio you are talking to must be set to the same channel. Hold the radio approximately. To transmit, press and hold the PTT switch, then speak into the microphone using your normal speaking voice. Hold the microphone approxi-. By pressing the PTT button while the radio is scanning, the radio will transmit on the channel which was selected before Scan was activated. If no transmission.
Gitte Gold Collection Gitte